Free ntp servers static ip address software#

Use Avigilon Control Center Server with a failover external NTP.Select this option if you want to use an external NTP server only.

Free ntp servers static ip address software#

Select this option if you want the camera to keep time through the Avigilon Control Centerв„ў software only. Always use Avigilon Control Center NTP Server.Select the NTP source to use for keeping time:.In the NTP Server area, indicate if you want the camera to use an NTP server to keep time.If you want to limit camera access to secure connections only, clear the Enable HTTP connections check box. In the Control Ports area, you can specify which control ports are used to access the camera.In the case that both the preferred server and the first alternate server are unavailable, the camera will attempt to connect to this server. Alternate DNS server 2: (optional) assign the address of another alternate DNS server to this field.In the case that the preferred server is not available, the camera will attempt to connect to this server. Alternate DNS server 1: (optional) assign the address of an alternate DNS server to this field.Preferred DNS server: assign the address of the preferred DNS server in this field.Use the following DNS server addresses: select this option to manually set DNS server addresses.Obtain DNS server address automatically: select this option to automatically find a DNS server.In the DNS Lookup area, select how the camera will obtain a Domain Name System (DNS) server address.If you need to customize the hostname, enter it in the Hostname field.The IPv6 addresses that can be used to access the camera are listed under the Current IPv6 Addresses area. You can only assign a Default Gateway if RA is disabled. In the Default Gateway field, enter the Default Gateway you prefer to use.Note: The configured prefix length may not display correctly in the web interface, but the prefix used by the camera will be the configured length. For example, 2001:db8::1/32 would indicate the address prefix is 32-bits long.Д«y default, the prefix length is set to /64. To change the prefix length, enter the preferred IPv6 address using Classless Inter-Domain Routing (CIDR) notation. In the Static IPv6 Addresses field, enter the preferred IPv6 address.Off: the camera does not communicate with the DHCPv6 server.It does not accept an IPВ address from the DHCPv6 server. Stateless: the camera only receives DNS and NTP information from the DHCPv6 server.Stateful: the camera receives IPВ address, DNS and NTP information from the DHCPv6 server.Note: The Accept Router Advertisements setting must be enabled for this setting to perform as expected. Auto: DHCPv6 state is determined by router advertisements (RA).From the DHCPv6 State drop-down list, select one of the following:.Select the Accept Router Advertisements check box if using Stateless Address Auto-Configuration.Note: Enabling IPv6 does not disable IPv4 settings. If the camera supports IPv6, select the Enable IPv6 check box to configure the following settings.Select the Disable setting static IP address through ARP/Ping method check box to disable the ARP/Ping method of setting an IP address.Default Gateway: Enter the Default Gateway you want to use.Subnet Mask: Enter the Subnet Mask you want to use.IP Address: Enter the IP Address you want to use.Use the following IP address: select this option to manually assign a static IP address.If it cannot obtain an address, the IP address will default to addresses in the .x range. The IP address is obtained from a DHCP server. Obtain an IP address automatically: select this option to connect to the network through an automatically assigned IP address.At the top of the page, select how the camera obtains an IP address:.Note: You can only set the HTTPS port, the RTSP port, and the NTP Server in the camera web interface. On the Network page, you can change how the camera connects to the server network and choose how the camera keeps time.